HP ProCurve – ukryte komendy

Urządzenia serii HP ProCurve dysponują ukrytym zestawem komend, które mogą być pomocne przy troubeshootingu bądź innych nietypowych operacjach na sieci. Zestaw komend może być różny w zależności od modelu urządzenia i wersji oprogramowania. A teraz krótko, krok po kroku jak włączyć ukryte komendy:

1. logujemy się na urządzenie za pomocą telnet lub ssh
2. wpisujemy komendę “edomtset” i naciskamy ENTER
3. ponownie wpisujemy komendę “edomtset” i naciskamy ENTER
4. otrzymujemy ostrzeżenie o udostępnieniu ukrytych komend, a prompt zmieni sie z “#” na “$”

Tak to wygląda na moim HP 2530G-48

Switch# edomtset
Switch# edomtset
ATTENTION: You are entering a diagnostic mode on this product that is HP
Confidential and Proprietary. This mode, the commands and functionality
specific to this mode, and all output from this mode are HP Confidential
and Proprietary. You may use this mode only by specific permission of, and
under the direction of, an HP support engineer or HP technical engineer.
Unauthorized or improper use of this mode will be considered by HP to be
unauthorized modification of the product and any resulting defects or
issues are not eligible for coverage under the HP product warranty or any
HP support or service. UNAUTHORIZED OR IMPROPER USE OF THIS MODE CAN MAKE
THE PRODUCT COMPLETELY INOPERABLE.

WABAGSWAC007$
 logout                Terminate this console/telnet session.
 DEBUGIO               Redirects output from all printf()'s to the screen
 FORCE_REDRAW          Forces the redraw of field labels in config screens
 LABprototype          Change LAB Prototype status
 UPTIMESHOW            Shows time the switch has been up
 SESLOG                Shows Session Log
 DATAProtshow          Show information on all dataProt semaphores
 i2cw                  Write data to device using I2C Abstraction
 i2cr                  Read data from device using I2C Abstraction
 i2cdt                 List I2C Device ID table using I2C Abstraction
 i2cst                 Perform a quick I2C test for all I2C devices
 bspmemmap             print an asic art diagram of the memory configuration
 bspdebug              set the BSP debug output level
 CPLD_VERSION          Verify CPLD code.
 CPLD_UPDATE           Update CPLD code.
 getTaskCpuUsage       get cpu usage for the task.
 BCM                   Broadcom Debug: bcm 
 UNIT_INIT             Recommended Usage: [slot <number(s)>] unit_init
 UNIT_UPDATE           Recommended Usage: [slot <number(s)>] unit_update
 L2CACHESHOW           show the sw cache table for l2 user entry
 UNIT_LINK             Checks link state of slot's ports
 MSGPoolshow           Dumps the MSG pool
 PKTPoolshow           Dumps the PKT pool
 BUFSHOW               Dumps a MSG or PKT buffer
 MMpoolStatsShow       Show the MM pool allocation statistics
 OOBMpoolStatsShow     Show the OOBM pool allocation statistics
 PKTpoolStatsShow      Show the PKT pool allocation statistics
 MSGpoolStatsShow      Show the MSG pool allocation statistics
 PKTPoolDatashow       Dumps the PKT pool data
 PKTpoolcrashifless    Crash if pkt pool goes below this
 CRASHLogfileshow      Show all recorded crash log records
 CRASHLOGClear         Clear Crash Log: crashLogClear
 CRASHLOGTest
 CRASHData             Show crash information
 EVENTLogfileshow      Show contents of the event log file
 logFilterShow         Show log filters information
 clientServerInfoShow  Information on registered Servers
 clientServerConnShow  Information on registered Client-Server connections
 devIdleStatsShow      Display devIdle stats
 devIdleStatsClear     Clears devIdle stats
 SVCDEVshow            Show the SVC devices
 ghs                   GHS debug console
 sortStack             Show a list of tasks sorted by stack base memory address
 searchmemory          search for a value in a memory range
 ghsHeapCheck          Check the GHS Heap for corruption
 ghsHeapStats          Print out usage stats for the GHS Heap
 ghsHeapAllocBlocks    Print out info on all allocated blocks
 ghsHeapFreeBlocks     Print out info on all free blocks
 ghsHeapBuckets        Print out info on all buckets (VERY WORDY!)
 mallocTest2           debug malloc routine
 leakMem               Leak Memory by malloc and not free
 SocErrorShow          Show socket errors
 timeslicetest         Test to make sure the OS is time slicing correctly
 listTasks             List taks matching the specified 
 ltintegrationTimer    View or set the ghs lt stats measure interval
 PORTSETDescriptorS... Display contents of a portset desc
 bfaDump               dump bfa data
 bfaClear              clear bfa data
 SEMAllshow            Show information on all switch semaphores
 EXCeption-ignore      Manage the exception list
 RTCHeck-ignore        Manage the run-time check ignore list
 OSALSEMshow           Show semaphore internal information
 SVC                   Service layer command
 DSA2                   Test mode command to generate DSA2 key/signature gen/ver
 tls-min               Set the tls minimum version and cipher suite for an app
 DMACOUNTERSshow       Show DMA Driver counters
 DMACLEARcounters      Clear DMA Driver counters
 VERsion               Display firmware version stamp
 ROMVERsion            Display ROM Version
 SETTERM               set the terminal to vt100 or ASCII
 TIMERTEST             test the svc timer
 BOOTCOUNTER           Number of times this switch has been powered up.
 HReset                Hard Reset of the Switch
 UPDMAC                Update the MAC address (AABBCC-DDEEFF) :
 UPDMACNUM             Update the number of MAC addresses
 UPDSN                 Update the Serial Number
 enablepcmds           Enable PPMGR show commands
 LED                   Turn all possible LEDs [on|blink|off]
 SMode                 Set Memory Mode: sm [-l -b -h -w -a -d -n -i -c -s] Set default memory operation
                       modes (MOPT).
 STFLASHCmd            Test the flash integrity via Read, Erase & Validate
 Read                  Read memory: r [MOPT] 
 WR                    Write memory: w [MOPT]  
 FILL                  Fill memory: fill [MOPT]   
 ENABLESTBENCHCMD      Enable selftest benchcmds
 UPDMFG                Update the specified manufacturing info
 CLRMFG                Clear the specified manufacturing info
 UPDHWINFO             Update the specified hardware info
 CLRHWINFO             Clear the specified hardware info
 STREBOOT              Reboot to Benchmode
 SYSINFO               Display system info
 NSRSHOW               Shows namespace statistics
 NSSHOW                Shows namespace objects info
 NSTASKSHOW            Show namespace info about tasks
 nsaStats              display NSA stats
 nsaShow               display NSA callback (none = display all)
 taskUsageShow         Show task-specific estimated CPU usage
 taskUsageGroupStat... Show group summarized estimated CPU usage
 taskUsageGroupMapS... Show task name to group mappings
 taskUsageSet          Set task tracker parameters
 taskTimeShow          Show task time used since boot/reset
 taskTimeClear         Reset total task time used
 taskModify            Modify the state of a task (halt,resume,etc)
 taskUsageTaskMapShow  Show internal to customer-ready task mappings
 taskUsageSlotSet      Set task usage parameters
 taskUsageSlotShow     Display task usage details
 taskRun               Spawn and Run the task "taskRun" for given interval time
 assertCountersShow    Show ASSERT counters
 assertCountersClear   Clear ASSERT counters
 tlvShowCounts         display TLV context stats
 generateEvent         Generates the given event ID
 dType                 debug type set/clear
 LLshow                Detailed directory listing: llShow  chain chain-name [set parameters]>KMS <add|del|set> key chain-name key-id [set
                       parameteres]KMS show
 IPARTblshow           Show route desc tbl
 IPARCntshow           Show route desc counts
 IPAMArplistshow       Show IPAM ARPs
 IPAGWshow             Show gateways
 IPAOwnIpshow          Show Own IP table
 IPARadixshow          Show Radix table
 IPAREsolveroute       Resolve IP destination
 IPAREsolvefwdpath     Resolve IP fwd path
 IPATunnelshow         Show Tunnel table
 IPAMEMShow            Show IPAM memory usage
 IPAIfTableshow        Show Interface table
 ipamShowTech          Show tech information for IP address manager master
 ipamShowTechStaleR... Show tech for IP address manager master to show stale FIB routes
 ipamConfigShow        IpAddrmgr configuration
 ipamDebugShow         IpAddrmgr debug log status
 ipamCountersShow      Show IP master counters
 ipamHostCacheShow     Show master host cache memory usage and table
 ipamNbrNUDTimersShow  Walk and show nbr NUD timeout timer trees
 ipamNotifyFuncsShow   Show notification functions list
 ipamRdTotalShow       Show Route table total counts
 ipamLogStats          Show IP Addr Mgr message stats
 ipamLogShow           Show IP Addr Mgr message log history
 ipamFailTimerDelay    Set the IPAM failover timer value
 ipamUnresponsiveHost  Show the cache of unresponsive hosts
 ipamStatShow          Show IP Addr Mgr stats
 ipamStatReset         Reset IP Addr Mgr stats
 IPASSHowtech          Show tech information for IP address manager slave
 IPASCONfigshow        IPAM Slave Configuration
 IPASDebugShow         IPAM Slave debug log status
 IPASCOUntersshow      Show IPAM slave counters
 IPASL3TablesUpdate... Counters for L3 tables updated for drop and copy
 arpFlush              Clear the ARP cache
 IPshow                Display switch ip tables
 iputilCfgShow         Show config information for IP utils
 IPV4STATshow          Display statistics for IPv4 packets
 IPV4ERRORSTATshow     Display error statistics for IPv4 packets
 IPV6STATshow          Display statistics for IPv6 packets
 IPV6ERRORSTATshow     Display error statistics for IPv6 packets
 IPSYSSTATshow         Display IP MIB statistics
 TCPSTATshow           Display all statistics for the TCP protocol
 nslookup              DNS lookup utility
 ipIfmShowState        Show info for IFM state machine
 ipXmitArpRequestTest  Test ip_xmit_arp_request
 ipXmitArpRequestFr... Test ip_xmit_arp_request_from_ip
 ipv6XmitTest          Test ipv6_xmit_ns_request
 ipShowTech            Show tech information for IP stack
 RVSHOWIfm             Redundant management stats for Ifm
 DHCPCOUNTERSshow      Display dhcp counters
 dhcpAllowShortLease   Allow very short lease time for testing
 DHCPv4PrintOptions    Displays all DHCP options on a vlan
 DHCPv4PrintHostnam... Displays hostname specific configurations on a vlan
 DHCPv4PrintVendorS... Displays all vendor specific configurations on a vlan
 DHCPv4ParseOptions    Displays all DHCP options on a vlan
 ghsNetStatShow        Show the GHS routing table, TCP/UDP sockets tables per vrf
 ghsDevDriverShow      Show GHS interface specific stats and configurations
 rtMgrMemShow          Dumps RouteMgr Memory usage
 cListShowList         Test routine for Show
 cListShowHitcount     Test routine to display hitcount
 cListEntryDisplay     Test routine to print cListEntry array
 cListEntryStopDisp... Test routine to stop print cListEntry array
 cListSetLogTime       Test routine to set acl log timer
 cListDisplayipAclF... Test routine to print the ipAclFilterHandle array
 cListMirrDelete       Test routine for deleting am irror session
 cListMirrGetDestBits  Test routine for getting the mirror destination bits for a mirror policy
 cListMirrGetDestFo... Test routine for getting the mirror destination bits for a specific rule in a mirror policy
 cListEntryCount       Display the number of ACL/classifier entries
 DHCPv6CSetTraceMask   Used to set the dhcpv6 client trace mask
 DHCPv6CEnable         Used to enable dhcpv6 client on a vlan
 DHCPv6CDisable        Used to disable dhcpv6 client on a vlan
 DHCPv6CLogThrottle    Used to enable/disable dhcpv6 client log throttling
 DHCPv6CMemStatsShow   Used to print memory statistics
 DHCPv6CConfigShow     Used to print runtime configuration
 DHCPv6CStatsShow      Used to print runtime statistics
 DHCPv6CStatsClear     Used to clear runtime statistics
 DHCPv6CVlanOper       Used to simulate Vlan operations
 DHCPv6CSetAuthParams  Sets auth params
 DHCPv6CPrintAuthPa... Sets auth params
 DHCPv6CTestParseOp... Test option parsing
 UDPFSTATINFO          Display the Counters for UDP Forwarding and DHCP Relay Agent.
 timep_show            Show recent timep status
 srcipShow             Display Source IP info (use "help" to see all cmds)
 httpShowSocketPool    Display HTTP socket pool
 httpdatatest          Uncompress HTML data and show
 httpauthtest          Send fake auth done message
 httpShowUsage         Display http usage
 httpByodRedirect      Start or stop http redirect
 httpEwaShow           Show EWA server status
 mstpShow              Display MSTP info (use "help" to see all cmds)
 mstpDbg               MSTP Debugger
 GStateDisplay         Displays the garp state of the port
 GVRPPConfig           GVRP Port Configuration (Learn/Block/Disable)
 GVRPPState            GVRP Port State (RegState - Fixed/No/Normal)
 GVRPSTat              GVRP Statistics
 GVRPPortInfo          GVRP Port Information
 pvstShow              Display PVST info (use "help" to see all cmds)
 pvstShowDbgCtrs       Display PVST Dbg Ctrs for vlan# port#
 pvstSetNearStarved... set the nearStarvedBpduFactor vlan# port# value as in (3*hello -x)
 pvstShowStarvation... Display PVST Debug Starvation Ctrs (TIMER_TICK_EXCEED & UNBUNDLING_EXCEED)
 pvstClearStarvatio... Clear PVST Debug Starvation Ctrs
 pvstShowDbgLogBuf     Display pvstDbgLog[][] buffer
 pvstDbg               PVST Debugger
 LOOPPROTECTshow       show internal loop protect information
 RVSHOWloopprotect     show internal loop protect information for redundancy-verify
 dcaClient             dcaClient 
 idmAclShow            Show IDM ACLs.
 idmAclApply           Apply IDM ACLs for testing
 idmCosApply           Apply IDM CoS and rate limits for testing
 authShow              Display Authentication info (use "help" to see all cmds)
 PA                    PA <show|set|init> show [port-number] [counters] set [port-number] [disable|enable|var-name ] init
                       [port-number] [counters]
 PAS                   PAS <show|set|init> show [port-number] set [port-number] [disable|enable|var-name ] init
                       [port-number]
 webmacauthdefault     Clear web, MAC and Local mac-auth config records (all ports)
 macauthstart          Start MAC Auth
 macauthConfigshow     Show MAC auth config
 macauthclientstatu... Show MAC auth client status
 macauthportstatuss... Show MAC auth port status
 localmacauthstart     Start Local MAC Auth
 localmacauthconfig... Show Local MAC Auth config
 localmacauthclient... Show Local MAC auth client status
 localmacauthportst... Show Local MAC auth port status
 wmaDhcpShow           Show DHCP server status
 wmaEwaShow            Show EWA server status
 webAuthClient         Client for testing web-based authentication
 wmaDriverShow         Show WMA Dev Driver specific stats and configurations
 wmaDriverDebugEnable  Enable WMA Dev Driver debug printing
 wmaNetStat            Show NetStat content for the WMA VRF Instance
 wmaRedirectStatShow   Show mac-auth http-redirect statistics
 waDhcpsCounters       Command to display Web Auth DHCPS counters
 lmaDbUpdate
 lmaDbUtil             lmaDbUtil <isMacExist|traverseLmaProfTbl|traverseLmaMacTbl|clearLmaMacTbl>isMacExist mac 
 rvShowLmaDb           rvShowLmaDb
 autzShow              Display Authorization info (use "help" to see all cmds)
 slogShow              show syslog data
 syslogTestSend        Send syslog msg (test)
 slogTlsLog            Test syslog over TLS
 IMAGELOCKshow         Show recent lock/unlock on the switch image
 mlshow                Display mac lockdown and lockout info
 cdp_show              Show cdp packet information
 cdpRunMode            CDP mode
 lldpShow              Show lldp information
 lldpRecordsClear      clear lldp neighbor information
 lldpClearCounters     clear lldp rx and tx counters
 lldpAppDataShow       Displays lldp serviceframework data structures
 lldpEeeTlvShow        Shows the local and remote EEE TLV data
 lldpEeeGenEvent       Helps to generate L1 events to LLDP from testmode
 lldpPoeShow           Show lldp Poe specific information
 EASESHOW              Display EASE information
 SFLOWMULTIPLIERSHOW   Display SFlow multiplier information
 sntp_show             Show recent sntp status
 GPPCV2TablesShow      Display GPPCV2 tables
 GPPC2ClsEntryTest     Test routine for GPPCv2 Policy Entries
 smartlinkGroupInfo... Display groupInfo of a smartlink group
 rvshowsmartlink       rvshowsmartlink
 cronTest              Show cron subsystem status
 byod-redirectDNSTest  DNS resolving portal server url's FQDN
 CFGSHOWINFO           Display all config instrumentation.
 CFGSHOWNODES          Display current node values.
 CFGSHOWCFG            Display current config values.
 CFGSHOWMEM            Display current memory values.
 CFGSHOWHASH           Display running/startup config hash.
 CFGSHOWSCHEMA         Display current config schema.
 CLICmdList            Displays the list of CLI commands
 CLICmdHelp            Generates xml tree of all CLI commands.
 CliConfigTest         Verify CLI generation/Xlate function
 NEGINIT               Init link logging
 NEGLINK               Enable disable link logging
 NEGFAULTS             Show neg faults
 NEGLOSSLOG            Show neg faults
 NEGLINKLOG            Show neg faults
 NEGCLEARLOG           Clear link and loss logs
 SPORTRECSHOW          Display PPMGR Slave Port Record: Sportrecshow [portNum].
 BCMSCHANMEMERRCHKCMD  Check the count of s-chan errs.
 DEAD_PHY_CHECK_CMD    Setup a dead phy situation - check FFI .
 PSP                   Suspends physical port manager and its monitor task.
 TRACEVIEWALL          View all trace
 TRACEMAX              Change max lines of tracing
 PPMGRTRACESTATUS      Show ppmgr trace settings
 PPMGRTRACEPORTADD     Add a port to tracingi list( 0 for all ports)
 PPMGRTRACEPORTDEL     Delete a port from trace list(0 for all ports)
 PPMGRTRACELEVEL       Change level of tracing
 HSTEST                Test ppmgr hotswap cleanup.
 PHYSHOW               Show Phy/SFP/X2 registers.
 PORTPHYTEMPSHOW       Show Phy temperature of the port.
 PHYREGDUMP            Dump PHY Registers.
 PHYREAD               PhyRead.
 PHYWRITE              PhyWrite.
 ppmgrXcvrInsert       Simulate xcvr insertion
 ppmgrXcvrRemove       Simulate xcvr removal
 XCVRRECSHOWCMD        Print out Transceiver init info.
 GENDRVSLVREAD         Read the generic driver info for a port #.
 JUMBOSSHOWCMD         Print out Jumbos info.
 ppmgr_statemachine... Print Port and Xcvr SM info.
 ppmgr_poll_interval   Changes behavior of PPMGR polling.
 ppmgr_debug           Changes behavior of PPMGR debug.
 PAGEDPHYSHOW          Show PHY registers of page based PHY Registers.
 PAGEDPHYWRITE         PhyWrite.
 ppmgr_num_ports_up    Print type and no.
 PORTReserve           Reserve/Unreserve a port as port type.
 eeeShow               Show EEE registers.
 ff_show               Show Fault Finder data structs
 ff_mask               Show Fault Finder mask
 ff_isTestOK           Queries FF if sufficient time remains for test
 ff_interval_count     Returns the polling interval counts
 ff_long_interval_c... Returns the long polling interval counts
 ff_bcast_set          Sets Fault Finder broadcast data structs on Slave
 cntrs_port            Retrieve counters of a single port.
 cntrs_portgrp         Retrieve grouped counters of a single port.
 cntrs_addportcntrs    Adds to SW copy of a counter of a port.
 cntrs_hw_addportcntr  Adds to a HW counter of a single port.
 cntrs_hw_readportc... Reads a HW counter of a single port.
 cntrs_hw_clearport... Clears a HW counter of a single port.
 MTMTraceMask          displays trace mask
 MTMSetTraceBit        sets trace bit (0-31)
 MTMClearTraceBit      clears trace bit (0-31)
 MTMVlanShow           diplays mtm info for all vlans or specified vlan
 MTMShow               diplays mtm info for mtm application
 MTMSL2EShow           displays all SL2E entries
 MTMFilterShow         displays all Filter entries
 MTMEnableThrottling   Enables Throttling feature in MTM
 MTMDisableThrottling  Disables Throttling feature in MTM
 MTMI6VBCEnable        runs Mtm_IPv6VlanBridgeControlEnable(VLAN_t v)
 MTMI6VBCDisable       runs Mtm_IPv6VlanBridgeControlDisable(VLAN_t v)
 MTMI6VBCFilterGrou... runs Mtm_IPv6VlanBridgeControlFilterGroupAddAnySource(VLAN_t, IP6Ptr_t pGroup, PORT_MAP *pPM, boolean
                       *pPending)
 MTMI6VBCFilterGrou... runs Mtm_IPv6VlanBridgeControlFilterGroupRemove(VLAN_t vlan, IP6Ptr_t pGroup)
 MTMI6VBCFilterGAddP   runs Mtm_IPv6VlanBridgeControlFilterGroupAnySourceAddPort(VLAN_t, IP6Ptr_t pGroup, LPORT_t port)
 MTMI6VBCFilterGRem... runs Mtm_IPv6VlanBridgeControlFilterGroupAnySourceRemovePort(VLAN_t, IP6Ptr_t pGroup, LPORT_t port)
 MTMI6VBCFloodGroup... runs Mtm_IPv6VlanBridgeControlFloodGroupAddAnySource(VLAN_t, IP6Ptr_t pGroup)
 MTMI6VBCFloodGroup... runs Mtm_IPv6VlanBridgeControlFloodGroupRemove(VLAN_t vlan, IP6Ptr_t pGroup)
 MTMI6VBCFilterGrou... runs Mtm_IPv6VlanBridgeControlFilterGroupSrcAdd(VLAN_t, IP6Ptr_t pGroup, IP6Ptr_t pSrc, PORT_MAP *pPM,
                       boolean *pPending)
 MTMI6VBCFilterGrou... runs Mtm_IPv6VlanBridgeControlFilterGroupSrcRemove(VLAN_t vlan, IP6Ptr_t pGroup, IP6Ptr_t pSrc)
 MTMI6VBCFilterGSrc... runs Mtm_IPv6VlanBridgeControlFilterGroupSourceAddPort(VLAN_t, IP6Ptr_t pGroup, IP6Ptr_t pSrc, LPORT_t
                       port)
 MTMI6VBCFilterGSrc... runs Mtm_IPv6VlanBridgeControlFilterGroupSourceRemovePort(VLAN_t, IP6Ptr_t pGroup, IP6Ptr_t pSrc, LPORT_t
                       port)
 MTMI6VBCFloodGroup... runs Mtm_IPv6VlanBridgeControlFloodGroupAddSource(VLAN_t, IP6Ptr_t pGroup, IP6Ptr_t pSrc)
 MTMI6VBCFloodGroup... runs Mtm_IPv6VlanBridgeControlFloodGroupSrcRemove(VLAN_t vlan, IP6Ptr_t pGroup, IP6Ptr_t pSrc)
 MTMI6VBCFilterUnkn... runs Mtm_IPv6VlanBridgeControlFilterUnknownEnable(VLAN_t, PORT_MAP *pPM)
 MTMI6VBCFilterUnkn... runs Mtm_IPv6VlanBridgeControlFilterUnknownDisable(VLAN_t)
 MTMI6VBCFilterUnkn... runs Mtm_IPv6VlanFloodPortAdd( VLAN_t, LPORT_t port)
 MTMI6VBCFilterUnkn... runs Mtm_IPv6VlanBridgeControlFilterUnknownRemovePort(VLAN_t, LPORT_t port)
 MTMI6VBCUnknownAdd... runs Mtm_IPv6VlanBridgeControlFilterUnknownAddPort(VLAN_t, LPORT_t)
 MTMI6VBCUnknownRem... runs Mtm_IPv6VlanBridgeControlFilterUnknownRemovePort(VLAN_t, LPORT_t)
 MTMI6VBCUnknownRep... runs Mtm_IPv6VlanBridgeControlFilterUnknownReplacePortMap(VLAN_t, LPORT_t)
 mtmNMRegisterNMCli... Registers Non Multicast Client with MTM
 mtmNMUnRegisterNMC... UnRegisters Non Multicast Client with MTM
 mtmNMModifyResvNMC... Modifies reservations for Non Multicast Client
 mtmNMAllocResNMCli... Allocates resource to Non Multicast Client
 mtmNMDeAllocResNMC... free an allocated resource from the Non Multicast Client
 mtmNMRemAllResNMCl... free all the allocated resources used by the Non Multicast Client
 mtmNMUpdPortToResN... update a port for an allocated non mcast resource
 mtmNMSMMAllocResNM... Allocates resource to Non Multicast Client On Standby
 mtmNMSMMDeAllocRes... free an allocated resource from the Non Multicast Client on Standby
 mtmNMSMMRemAllResN... free all the allocated resources used by the Non Multicast Client on standby
 mtmNMSMMUpdPortToR... update a port for an allocated non mcast resource on standby
 mtmNMShowNMClientS... shows Non Multicast clients statistics
 mtmNMShowNMFilterS... shows Non Multicast Filter statistics
 MTMI4VVlanShow        diplays mtm ipv4 info for all vlans or specified vlan
 MTMI4VBCEnable        runs Mtm_IPv4VlanBridgeControlEnable(VLAN_t v)
 MTMI4VBCDisable       runs Mtm_IPv4VlanBridgeControlDisable(VLAN_t v)
 MTMI4VBCFilterGrou... runs Mtm_IPv4VlanBridgeControlFilterGroupAddAnySource(VLAN_t, IP4Ptr_t pGroup, PORT_MAP *pPM, boolean
                       *pPending)
 MTMI4VBCFilterGrou... runs Mtm_IPv4VlanBridgeControlFilterGroupRemove(VLAN_t vlan, IP4Ptr_t pGroup)
 MTMI4VBCFilterGAddP   runs Mtm_IPv4VlanBridgeControlFilterGroupAnySourceAddPort(VLAN_t, IP4Ptr_t pGroup, LPORT_t port)
 MTMI4VBCFilterGRem... runs Mtm_IPv4VlanBridgeControlFilterGroupAnySourceRemovePort(VLAN_t, IP4Ptr_t pGroup, LPORT_t port)
 MTMI4VBCFloodGroup... runs Mtm_IPv4VlanBridgeControlFloodGroupAddAnySource(VLAN_t, IP4Ptr_t pGroup)
 MTMI4VBCFloodGroup... runs Mtm_IPv4VlanBridgeControlFloodGroupRemove(VLAN_t vlan, IP4Ptr_t pGroup)
 MTMI4VBCFilterUnkn... runs Mtm_IPv4VlanBridgeControlFilterUnknownEnable(VLAN_t, PORT_MAP *pPM)
 MTMI4VBCFilterUnkn... runs Mtm_IPv4VlanBridgeControlFilterUnknownDisable(VLAN_t)
 MTMI4VBCFilterUnkn... runs Mtm_IPv4VlanBridgeControlFilterUnknownAddPort( VLAN_t, LPORT_t port)
 MTMI4VBCFilterUnkn... runs Mtm_IPv4VlanBridgeControlFilterUnknownRemovePort(VLAN_t, LPORT_t port)
 MTMI4VBCDelayedFlu... runs Mtm_IPv4VlanBridgeControlDelayedFlushEnable(VLAN_t, LPORT_t port)
 MTMI4VBCDelayedFlu... runs Mtm_IPv4VlanBridgeControlDelayedFlushDisable(VLAN_t, LPORT_t port)
 lsaLogEnable          0-disable,1-enable
 lsaLog                0-all,1-new,2-old,3-changed
 spfLog                get spf time
 rtstackMemTracker     Display Memory used by Router Stack
 nhRouteMemory         Show Route Table Memory Stats
 nhIPv4RouteSummary    Show IPv4 Route Table Statistics
 nhIPv6RouteSummary    Show IPv6 Route Table Statistics
 mioInstLog            Show mio instrumentation log
 gatedInstLog          Show GateD instrumentation log
 gatedOspfSockOpt      Display/Configure Ospf Sock Options
 MLDTraceMask          displays trace mask
 MLDSetTraceBit        sets trace bit (0-31)
 MLDClearTraceBit      clears trace bit (0-31)
 MLDVlanEnable         enables mld for a specified vlan
 MLDVlanDisable        disables mld for a specified vlan
 MLDGroupShow          shows group info for all vlans or specified vlan and optional group
 MLDVlanConfigShow     shows protocols configuration variables
 MLDGroupSrcShow       shows group Src info for a specified vlan,group and src
 MLDShow               shows mld application info
 MLDMemShow            shows mld application Mem info
 MLDVlanShow           shows mld status for a vlan
 MLDVlanEnableRouting  enable routing on vlan
 MLDVlanDisableRout... disable routing on vlan
 MLDEnablePortFastL... enable fastlearn on port
 MLDDisablePortFast... disable fastlearn on port
 MLDTimerTickTunerP... Mld timer tick tuner percentage
 MLDIncreaseMemoryL... Mld Increase Memory Limit
 MLDVlanSetQueryParam  Mld Vlan Set Query Param
 MLDForcedFastLeave... Mld forced fastleave timeout
 MLDPktThrottleShow    Show the packet queue depth for throttling
 MLDPktThrottleSet     Set the packet queue depth for throttling
 MLDEnableGSSQForDe... enable GSSQ for Deleted Src
 MLDDisableGSSQForD... disable GSSQ for Deleted Src
 IGMPTraceMask         displays trace mask
 IGMPSetTraceBit       sets trace bit (0-31)
 IGMPClearTraceBit     clears trace bit (0-31)
 IGMPVlanEnable        enables igmp for a specified vlan
 IGMPVlanDisable       disables igmp for a specified vlan
 IGMPGroupShow         shows group info for all vlans or specified vlan and optional group
 IGMPVlanConfigShow    shows protocols configuration variables
 IGMPGroupDetailShow   shows group detailed info for a specified vlan and and group
 IGMPShow              shows igmp application info
 IGMPVlanShow          shows igmp status for a vlan
 IGMPStaticGroupAdd    Adds Static Group on a specified vlan
 IGMPStaticGroupRem... Removes added Static Group on a specified vlan
 IGMPPktThrottleShow   Show the packet queue depth for throttling
 IGMPPktThrottleSet    Set the packet queue depth for throttling
 IGMPQuerierWaiting    enable/disable querier waiting
 IGMPJoinPriority      increase/reset join packet priority
 IGMPVlanCounterShow   show igmp vlan specific counters
 IGMPRFC4541QueryFe... enable/disable RFC4541QueryFeature
 CLITOMIBDisplay       display CLI to SNMP objects
 sendTrap              generate and send specified SNMP trap
 dumpSwitchErrorMsg... Dump the switch error message Table content
 TR69DeleteAllFiles    Delete all TR-069 configuration and state files from RAM and flash.
 TR69DisableCwmpFor... Disable CWMP (TR-069 control task) forcibly.
 TR69SetLoggingLevel   Set the logging level
 TR69ShowLog           Show the TR-069 client log
 TR69ShowLoggingLevel  Shows the current logging level

 backup                Backup next startup-configuration file to TFTP server
 boot                  Reboot the device.
 clear                 Clear table/statistics.
 clock                 Display/set current time, date, and local time parameters.
 command-alias         Specify command alias
 configure             Enter the Configuration context.
 copy                  Copy datafiles to/from the switch.
 debug                 Enable/disable debug logging.
 delete                Delete a file
 end                   Return to the Manager Exec context.
 erase                 Erase stored data files.
 getMIB                Retrieve and display the value of the MIB objects specified.
 getNextMIB            Retrieve and display the value of the next MIB object for each OID specified
 kill                  Kill other active console, Telnet, or SSH sessions.
 log                   Display log events.
 print                 Execute a command and redirect its output to the device channel for current session.
 process-tracking      Enable process tracking for active management module or specified interface modules.
 reboot                Reboot system/board/card
 redo                  Re-execute a command from history.
 reload                Warm reboot of the switch.
 rename                Change the name of the configuration OLDNAME to NEWNAME.
 repeat                Repeat execution of a previous command.
 reset                 Reset operation
 restore               Restore next startup-configuration file from TFTP server
 return                Exit to User View
 save                  Save current configuration
 schedule              Schedule system task
 screen-length         Specify the lines displayed on one screen
 session               Enable/disable show message type or cli interactive mode on the switch.
 setMIB                Set the value of a MIB object.
 setup                 Enter the 'Switch Setup' screen for basic switch configuration.
 ssh                   Initiate a SSH client session to another network device.
 startup               Specify system startup parameters
 startup-default       Set the default configuration file.
 system-view           Enter the System View.
 task-monitor          Enable the task monitoring of the specified feature.
 telnet                Initiate an outbound telnet session to another network device.
 terminal              Set the dimensions of the terminal window.
 test                  Run diagnostic tests.
 update                Enter Monitor ROM Console.
 walkMIB               Walk through all instances of the object specified displaying the MIB object names, instances and values.
 write                 View or save the running configuration of the switch.

 chassislocate         Control the chassis locate LED.
 display               Display current system information.
 enable                Enter the Manager Exec context.
 exit                  Return to the previous context or terminate current console/telnet session if you are in the Operator
                       context level.
 link-test             Test the connection to a MAC address on the LAN.
 logout                Terminate this console/telnet session.
 menu                  Change console user interface to menu system.
 page                  Toggle paging mode.
 ping                  Send IPv4 ping request(s) to a device on the network.
 ping6                 Send IPv6 ping request(s) to a device on the network.
 quit                  Exit from current command view
 show                  Display switch operation information.
 traceroute            Trace the IPv4 route to a device on the network.
 traceroute6           Trace the IPv6 route to a device on the network.
 verify                Verify the signature of a switch firmware image.

Leave a Reply